Version 6.02.2
Date: 18-12-2020 15:33
Viso Light Inspector 6.02.2.msi
UV SENSOR ONLY. Ver 6 supporting the new UV-VIS LabSensor Model2. Do not install this unless you have a UV-VIS sensor. New features for adding custom response curve and exposure dose map. Now also supporting all other Viso prodcuts, still not fully tested. Bug fixed when adding picture to measurement.

Version 6.02.1
Date: 17-12-2020 17:48
Viso Light Inspector 6.02.1.msi
UV SENSOR ONLY. Ver 5 supporting the new UV-VIS LabSensor Model2. Do not install this unless you have a UV-VIS sensor. New features for adding custom response curve and exposure dose map. Now also supporting all other Viso prodcuts, still not fully tested.

Version 6.02
Date: 30-11-2020 14:54
Viso Light Inspector 6.02.msi
New additions: Export (.csv and .xlsx) commands have been added to the DLL interface, new iso illuminance plot have been added. Updates: A lower limit has been added to flicker capture frequency (10Hz), PAR map now accepts more keywords in custom reports. Bug fixes: Minor bugs fixes

Version 6.01.1
Date: 13-11-2020 21:46
Viso Light Inspector 6.01.1.msi
UV SENSOR ONLY. Ver 4 supporting the new UV-VIS LabSensor Model2. Do not install this unless you have a UV-VIS sensor. New features for adding custom response curve and exposure dose map.

Version 6.01
Date: 03-11-2020 11:40
Viso Light Inspector 6.01.msi
New additions: DLL functions, TM30-18 CVG for custom reports, Search field for keywords, Send email checkbox added to measurement setup window, UFF (Upward flux fraction) keyword. Updates: Fixed reports moved into the same windows as custom. Bug fixes: TC08 not reading right, PstLM measurement crashing at 99%, Ability to open multiple of the same window.

Version 6.00
Date: 08-10-2020 11:07
Viso Light Inspector 6.00.msi
New additions: Keywords for TM30-18, 1.2m by 1.2m PAR map added to template toolbox, Two new report templates added. Updates: Changed angular distribution diagram to five division lines, Added Flicker value Mp and PstLM to non-word reports and to the Advanced template. Bug fixes: Minor bugs fixed.

Version 5.99.6
Date: 05-10-2020 17:40
Viso Light Inspector 5.99.6.msi
UV SENSOR ONLY. Ver 3 supporting the new UV-VIS LabSensor Model2. Do not install this unless you have a UV-VIS sensor. Bug auto setting of integration time getting stucked with UV fixed.

Version 5.99.5
Date: 05-10-2020 11:19
Viso Light Inspector 5.99.5.msi
UV SENSOR ONLY. Ver 2 supporting the new UV-VIS LabSensor Model2. Do not install this unless you have a UV-VIS sensor.

Version 5.99.4
Date: 25-09-2020 17:09
Viso Light Inspector 5.99.4.msi
UV SENSOR ONLY. First version supporting the new UV-VIS LabSensor Model2. Do not install this unless you have a UV-VIS sensor.

Version 5.99.3
Date: 25-09-2020 15:31
Viso Light Inspector 5.99.3.msi
New additions: Flicker - Mp value, Power measurement - Displacement power factor (DPF). Updates: Linear light measurement on Light Spion - The users are now able to set the size of the measured section of a linear lamp when they are not using the provided bracket, UGR table(export) - The so-called Reduced UGR Table (uncorrected UGR values, CIE 117-1995) has been omitted on purpose because of redundancy and users can safely delete the Standard table and Correction summand from the table, Flicker - The sample rate for the Basic measurements has been changed to 20,000sps and the sample rate for PstLM has been upped to 10,000sps. Measurement profile window - Use button behavior has been changed and closing the window will warn user about unsaved changes. Bug fixes: TLCI, THDV and THDC values with multi report export, Webcam missing preview, Strange UGR values, Custom labels not going back to default, Isolux and isocandela issue, a couple of window scaling issues, LDT/IES export template.

Version 5.99.2
Date: 01-09-2020 13:29
Viso Light Inspector 5.99.2.msi
Fixed some bugs with: Polar, iso lux and iso candela diagram. Added keywords for u', v' and a keyword for delta (u'v') per angle. Added two new efficiency bars for uMole and radiated power. Added export options for temperature measurements.

Version 5.99.1
Date: 05-08-2020 14:47
Viso Light Inspector 5.99.1.msi
Apply button added when setting manual integration time. Bug fixes to custom table measurement, hanging initialize window fixed when using manual integration time. Over saturation warning added to custom table measurement when using manual integration time.

Version 5.99
Date: 21-06-2020 22:52
Viso Light Inspector 5.99.msi
Issue with calculating UGR for single plane measurements has been fixed. Due to a bug was c-planes set to be exported as clockwise instead of counterclockwise, this means c-planes in the C90 and C270 direction was flipped. For most measurement this does not have any noticeable effect but for certain fixtures such as street light fixtures with asymmetrical light in the C90 and C270 plane would light direction have been flipped in opposite direction, this has now been fixed. This fix does not automatically apply corrections to previous made measurements, to check and apply this correction to previous made measurement simple select the measurement and type RECALC and then resave the measurement. C-planes C0, C90, C180 and C270 are now clearly indicated in the c-plane selection window making it easier to mount a lamp the desired orientation.

Version 5.98
Date: 05-06-2020 17:10
Viso Light Inspector 5.98.msi
Bug fix: In some rare cases can software lockup at startup has been fixed.

Version 5.97
Date: 02-06-2020 16:58
Viso Light Inspector 5.97.msi
DUV will now always be negative when below the blackbody curve

Version 5.96
Date: 25-05-2020 12:27
Viso Light Inspector 5.96.msi
Export->Advanced now also export csv files in selected angular step size.

Version 5.95
Date: 12-05-2020 13:06
Viso Light Inspector 5.95.msi
Bug fix: Cannot save LDT or see UGR for some fixtures with 90 degree limits, fixed. Delta uv does not changes when overriding color temperature, fixed.

Version 5.94
Date: 06-03-2020 16:30
Viso Light Inspector 5.94.msi
Bug fix: Luminaire dimensions visualization issues have been fixed

Version 5.93
Date: 14-02-2020 09:42
Viso Light Inspector 5.93.msi
Updates: Change layout a bit to make room for translated words, Fixed issue from 5.92 regarding translations files.

Version 5.92
Date: 13-02-2020 14:59
Viso Light Inspector 5.92.msi
Updates: New layout for the Library section to accommodate a wider measurement list, It's now possible to double-click the additional information field to get a table style window with the additional information text, A measurement time estimate system have been added. Go to Setup->Options->Advanced and tick the Enable box to enable it.

Version 5.91
Date: 20/01/2020 14:17
Viso Light Inspector 5.91.msi
Serial number is now shown under Help->Firmware for each device including LabFlicker

Version 5.90
Date: 17/01/2020 16:25
Viso Light Inspector 5.90.msi
Bug fix: Export to .LDT or .IES with very high resolution, Narrow beam continues endlessly, UGR calculations for bulbs and spots showed -infinity

Version 5.89
Date: 19/12/2019 15:07
Viso Light Inspector 5.89.msi
Bug fix: Export to .LDT or .IES with spherical limit could cause an issue.

Version 5.88
Date: 12/12/2019 10:36
Viso Light Inspector 5.88.msi
Bug fix: LDT being 0kb size has been fixed. Add calibration keywords to custom report toolbox.

Version 5.87
Date: 25-11-2019 15:14
Viso Light Inspector 5.87.msi
Light Inspector not launching issue fixed. UGR now shows n/a instead of -1.0, when a calculation wasn't possible. Flicker functions now added to DLL. Status label position fixed. CCT markers in reports fixed. Product image using phone, now shows an error message when the computer isn't online. Added a tool under help to caluculate the recommended measuring distance.

Version 5.86
Date: 11-10-2019 13:42
Viso Light Inspector 5.86.msi
It is now possible to make dedicated lamp orientation test, making it easier to be S025 compliant. Custom measurement tables can now be exported to excel. Measurement profile can now be created with specifics measurement setup. NITS (candela per square meter) keyword now included in custom PDF.

Version 5.85
Date: 01-10-2019 13:55
Viso Light Inspector 5.85.msi
TM30-18 is now implemented, TM30-15 is no longer used. Table measurement values can now be used in custom PDF export.

Version 5.84
Date: 19-09-2019 16:51
Viso Light Inspector 5.84.msi
Bugfix, saving custom table to PDF bug is now fixed.

Version 5.83
Date: 27-08-2019 17:11
Viso Light Inspector 5.83.msi
Auto C-plane detection, Manuals added to help menu, Option to send email when measurement ends.

Version 5.82
Date: 8/19/2019 11:00 AM
Viso Light Inspector 5.82.msi
IES file c-planes are now reduced when symmetry is used, so for V summitry is planes from 0-180 exported only, and for HV symmetry is 0-90-degree c-planes exported only. IES WIDTH and LENGTH dimensions has been swapped to conform with the IES standard. Demo measurement problem has been fixed.

Version 5.81
Date: 08-08-2019 16:27
Viso Light Inspector 5.81.msi
Fixed scaling issues with flicker window, fixed light dimension in .IES files, custom labels names nows shows in template toolbox, unlinked productname and file name

Version 5.80
Date: 24-07-2019 11:53
Viso Light Inspector 5.80.msi
Custom table measurement method now visible

Version 5.79
Date: 09-07-2019 17:14
Viso Light Inspector 5.79.msi
First beta version of custom table measurement method, allowing far a range for absolute measurement points to be measured for the automotive industry.

Version 5.78
Date: 08-07-2019 13:16
Viso Light Inspector 5.78.msi
Added support for temperature logging using external PICO board TC-08 and for external power analyzer Yokogawa WT310. And minor bug fixes.

Version 5.77
Date: 14-05-2019 15:36
Viso Light Inspector 5.77.msi
Internal functionality allowing customers to send calibration data to Viso by typing 'sendcali' right after application start, for easy support.

Version 5.76
Date: 29-04-2019 11:05
Viso Light Inspector 5.76.msi
New feature(s): Most of the graphics from the report tool box have been added to View->CRI/UGR/BUG/ISO LUX... for a live view the results without having to make a report. Bug fix: Right click to create folder in the measurement list have been removed, please use the create folder button instead. Fixed and issue with the zonal lumen.

Version 5.75
Date: 13-03-2019 17:50
Viso Light Inspector 5.75.msi
Bug fix: UGR values in PDF report showing as n/a has been fixed.

Version 5.74
Date: 07-03-2019 16:59
Viso Light Inspector 5.74.msi
Bug fix too slow movent of LabSpion and BaseSpion.

Version 5.73
Date: 07-03-2019 12:10
Viso Light Inspector 5.73.msi
Fix to image linked from smart phone.

Version 5.72
Date: 06-03-2019 10:18
Viso Light Inspector 5.72.msi
Fixes to some high dpi scaling issues. Image can be linked from smart phone. Individual symmetry when combining measurements now possible.

Version 5.71
Date: 26-02-2019 14:06
Viso Light Inspector 5.71.msi
First version for high resolution screens. Updated to framework 4.7.2. Fixed issues that could cause lower than selected measurement resolutions.

Version 5.70
Date: 31-01-2019 16:16
Viso Light Inspector 5.70.msi
Fixed issues that could cause Light Inspector not being able to create .ies and .ldt files, Fixed issue with usernames containing a space not being able to use 3D view.

Version 5.69
Date: 21-12-2018 13:47
Viso Light Inspector 5.69.msi
Fixed an issue with 3D viewing some specific measurements. Fixed some issues with the scaling of the Polar curve. Fixed an issue with Word tables formulas.

Version 5.68
Date: 13-12-2018 14:07
Viso Light Inspector 5.68.msi
Light Inspector updated to 64bit. Updated Options window. Added custom IES and LDT editor. Added height of luminous area. Added input field to select the wanted amount of planes. Improved PDF generation time. Some small bugs fixed.

Version 5.67
Date: 20-11-2018 15:08
Viso Light Inspector 5.67.msi
Power readout improved for optimal stability.

Version 5.66
Date: 19-11-2018 12:28
Viso Light Inspector 5.66.msi
Fixed product image aspect issues PDF. Fixed light-up in angular distribution-up. Changed status shown on the LabFlicker during measurement.

Version 5.65
Date: 01-11-2018 16:18
Viso Light Inspector 5.65.msi
Tracking failing when connecting to redundant server has now been fixed.

Version 5.64
Date: 22-10-2018 15:59
Viso Light Inspector 5.64.msi
It is now possible to copy the factory calibration into the custom calibration and modify the intensity calibration.

Version 5.63
Date: 15-10-2018 11:12
Viso Light Inspector 5.63.msi
Exporting to LDT, IES, CSV or XLSX will now be done in the measured step size instead of a locked 1 step size. XLSX has been added to advanced export. It's now possible to choose a custom c plane amount and step size for any export type using advanced export.

Version 5.61
Date: 08-10-2018 13:38
Viso Light Inspector 5.61.msi
Fixed an issue in 5.60 that caused the report graphics to move out of place.

Version 5.60
Date: 05-10-2018 16:06
Viso Light Inspector 5.60.msi
Reading power could in some cases result in no values has been fixed. Graphics alt text keyword issue fixed.

Version 5.59
Date: 03-10-2018 16:09
Viso Light Inspector 5.59.msi
Added Road reporting (BUG rating, LCS table and LCS graph) to the advanced custom report

Version 5.58
Date: 01-10-2018 08:46
Viso Light Inspector 5.58.msi
Fixed a bug related to exporting to LDT using advanced, on a measurement with a spherical limit.

Version 5.57
Date: 27-09-2018 14:10
Viso Light Inspector 5.57.msi
Option to measure PstLM with the LabFlicker added. Option to export to .xlsx added, Mean Spherical Candle Power keyword added. Current off-set for external power supply added. Option to export report graphics to .png added. Flicker page added to Standard and Advanced export.

Version 5.56
Date: 17-09-2018 17:20
Viso Light Inspector 5.56.msi
A measurement which was created by combining two measurements could when exported result in very large LDT/IES files, this has now been fixed.

Version 5.55
Date: 14-09-2018 13:29
Viso Light Inspector 5.55.msi
Measurement done with a limited area not equal to 90 or 180 degree can give problems when exported to IES or LDT and opened in for example Photometric Toolbox PE. This has now been fixed, IES files are now filled with 0 values so measurement area always matches 90 or 180 degree.

Version 5.54
Date: 07-09-2018 15:09
Viso Light Inspector 5.54.msi
All intensities at 0 degree are now always set to exact equal values when exporting IES and LDT.

Version 5.53
Date: 27-07-2018 12:28
Viso Light Inspector 5.53.msi
Changed Flicker export, Fixed an issue with advanced export, Minor updates to flicker window, Lab Flicker display update rate fixed, A custom warm up time can now be used, Measurement list can now be order by date.

Version 5.52
Date: 10-07-2018 12:44
Viso Light Inspector 5.52.msi
M_LUX and F_LUX has been added to keywords of the custom report generator toolbox, making it possible to get distance for a specified lux value.

Version 5.51
Date: 06-07-2018 15:08
Viso Light Inspector 5.51.msi
Detailed beam scan criteria for narrow beamed lamps has been set to a constant value for any selected measurement resolution, eliminating the narrow beam popup dialog even if a high resolution was selected. The CIE window is no longer active when light levels are too low. Warmup power curve has been fixed so single missing values does not affect the complete curve.

Version 5.50
Date: 05-07-2018 15:29
Viso Light Inspector 5.50.msi
New power details in warmup can result failed warmup window at close to zero power values, this has been fixed so power no longer is displayed for close to zero power values. Included is firmware 2.36 which resolved rare occurrences of locked up power analyzer.

Version 5.49
Date: 28-06-2018 15:13
Viso Light Inspector 5.49.msi
Item number has been added to the IES file, Added source lumen and relative efficiency to the keyword list, Tracking link added to keywords, Fixed a bug with exporting Flicker results to PDF, If you are using a hard coded sample rate in the flicker part of the report you can now use {FL_SAMPLE_RATE} instead, Fixed a couple of small bugs.

Version 5.48
Date: 13-06-2018 14:26
Viso Light Inspector 5.48.msi
Added a search field to the measurement list, Fixed an issue the caused the aspect ratio of the product image to change, Added a couple of keywords for a few of the PDF graphics (for now: Product photo, CIE 1931 and CIE 1931 zoomed and ISO LUX). Select the graphic on the list and the keyword will appear with a description.

Version 5.47
Date: 12-06-2018 11:53
Viso Light Inspector 5.47.msi
Template toolbox failed when opened has been fixed.

Version 5.46
Date: 07-06-2018 10:08
Viso Light Inspector 5.46.msi
New power measurement now also supported on LightSpion, firmware updated automatically. to update firmware. Sometime color data was not shown for high CCT lmaps has been fixed.

Version 5.45
Date: 04-06-2018 17:21
Viso Light Inspector 5.45.msi
Power measurement now included during lamp warmup. Power accuracy increased by increasing sample rate from 70K to 355K samples. The device must be running firmware version 2.34 for the new power features to work. Click help->Firmware->Update. to update firmware.

Version 5.44
Date: 01-06-2018 17:33
Viso Light Inspector 5.44.msi
Fixed the issue with measure distance not being shown. Fixed the lines shown in the wrong order in the budgetary diagram. Added {LUM_UP} and {LUM_DOWN}. Added {CUR_HARM} 1-40 for current harmonics. Added some keyboard shortcuts CTRL + S to save, CTRL + D to delete, CTRL + E to export to custom PDF, CTRL + N for new measurement, CTRL + I to export IES, CTRL + L to export to LDT. Fixed some minor bugs.

Version 5.43
Date: 23-05-2018 16:51
Viso Light Inspector 5.43.msi
JA8 Flicker values were by mistake displayed for flicker measurements made with Light Inspector version older than 5.37. JA8 specifies a sample duration of 1 second or greater, which older measurements doesn't have.

Version 5.42
Date: 11-05-2018 14:05
Viso Light Inspector 5.42.msi
Added TLCI ColorChecker graphics as an PDF option, Added numbers to THD graph, Updated the Non Word reports to also show PPF or Power depending on the measurement setup, Updated the software to disable the computers sleep/hibernation mode during a measurement. Fixed some other small issues.

Version 5.41
Date: 07-05-2018 14:10
Viso Light Inspector 5.41.msi
Symmetry and uplight bug in new IES and LDT is fixed. Minor bug in tracking of old measurements is fixed.

Version 5.40
Date: 03-05-2018 14:32
Viso Light Inspector 5.40.msi
Advanced export now supports CSV. Updated tracking verification

Version 5.39
Date: 02-05-2018 15:28
Viso Light Inspector 5.39.msi
Optimized saving at network drive. Shorten the welcome screen. Fixed a bug introduced in 5.38, that caused measurements to be saved in the measurement folder root.

Version 5.38
Date: 01-05-2018 15:01
Viso Light Inspector 5.38.msi
First version with version with tracking, measurements can now be tracked by the Viso tracking server, making it easy to verify and share measurements. IES and LDT update, zero values are no longer exported and only necessary planes are exported, intensity values are adjusted to exactly match the output. Symmetry is smoother. Compact fixture file format, making it possible to save measurement as small fixture files thus making them easier to share via email. Bug fix: lamp did not turn off warning on some LightSpions fixed. Lumen showing for single intensity measurements is now removed.

Version 5.37
Date: 30-04-2018 15:53
Viso Light Inspector 5.37.msi
Flicker can now be measured according to the JA8/10 standard, Lumen modification are now correctly being used when combining two measurements, Flicker data can now be exported to .CSV, Fixed an issue with the serial number in LDT file.

Version 5.36
Date: 03-04-2018 12:00
Viso Light Inspector 5.36.msi
Minor bug fixe: Conflict files from dropbox and corrupt history. New driver board pixel unequal fixed.

Version 5.35
Date: 27-03-2018 13:58
Viso Light Inspector 5.35.msi
Includes new firmware 2.33 which fixes minor USB connction issues, CPU is reset everytime USB is unplugged or software is closed.

Version 5.34
Date: 07-03-2018 14:08
Viso Light Inspector 5.34.msi
It's now possible to get two peaks with PEAKNM keyword, Power factor can now be inputted manually, TLCI value is now available as a keyword for the PDF report.

Version 5.33
Date: 09-02-2018 15:08
Viso Light Inspector 5.33.msi
Fixed some bugs, It's now possible to get beam width for a specific plane, Added TM30 Rf and Rf to .CSV

Version 5.32
Date: 02-02-2018 17:09
Viso Light Inspector 5.32.msi
Fixed some bugs, Now remembers the last used plane count

Version 5.31
Date: 15-01-2018 18:04
Viso Light Inspector 5.31.msi
Fixed an issue with using Excel graphs in Word templates, Increased text size in Cone diagram with text, Added support for new driver board for sensor

Version 5.30
Date: 05-01-2018 17:01
Viso Light Inspector 5.30.msi
Fixed a bug in Manual turn gonio, Updated the main window design

Version 5.29
Date: 02-01-2018 10:48
Viso Light Inspector 5.29.msi
Fixed combine (It's now possible to combine a rotated and a non rotated measurement), Added THD under Power Details

Version 5.28
Date: 21-12-2017 15:47
Viso Light Inspector 5.28.msi
Fixed a error in the FFT graph and SVM calculation for the PDF

Version 5.27
Date: 18-12-2017 11:40
Viso Light Inspector 5.27.msi
Fixed a bug in symmetry correction

Version 5.26
Date: 14-12-2017 16:19
Viso Light Inspector 5.26.msi
Add the ability to use a custom paper size when exporting to PDF, Enabled Power output measurement mode and fixed couple of minor bugs.

Version 5.25
Date: 08-11-2017 13:39
Viso Light Inspector 5.25.msi
First version supporting LabFlicker device. Bug fixed for lamp warm on LightSpion.

Version 5.23
Date: 03-10-2017 15:21
Viso Light Inspector 5.23.msi
Updated the dimensions settings for export to IES

Version 5.22
Date: 27-09-2017 16:33
Viso Light Inspector 5.22.msi
Change wording for lamp types, Added Zonal Lumen to LUM keyword (LUM90 or LUM15-90), Added an image of 0 and 90 degree angular distribution for PDF export.

Version 5.21
Date: 22-09-2017 13:57
Viso Light Inspector 5.21.msi
First version supporting new Ibsen spectrometer driver board.

Version 5.20
Date: 21-09-2017 11:55
Viso Light Inspector 5.20.msi
Small bug fix for combining measurements. Release candidate.

Version 5.19
Date: 06-09-2017 17:04
Viso Light Inspector 5.19.msi
Peak and dominant wave length added to custom report key words. Beam, Field and Cut off angle can be exported for individual planes. Bug fix contacting sensor if to old firmware was uploaded.

Version 5.18
Date: 31-08-2017 16:44
Viso Light Inspector 5.18.msi
Fixed a bug with 180 degrees measurements, Fixed a bug with special characters in export to PDF, Updated some labels

Version 5.17
Date: 29-08-2017 14:05
Viso Light Inspector 5.17.msi
Added beam angle field to CSV files (simple and advanced photo metric). Fix a bug when trying the angle correct a combined file with a beam angle of 360 degrees.

Version 5.16
Date: 21-08-2017 16:06
Viso Light Inspector 5.16.msi
Absolute and relative photometry can be selected from Edit->Photometric->Modify. New icons added. Quick button at library for exporting measurement. Power can now be added together when combining two measurements. Override beam angle in Edit->Photometric->Modify Out of memory when measuring at maximum vertical and horizontal resolution is now solved.

Version 5.15
Date: 13-07-2017 16:01
Viso Light Inspector 5.15.msi
Color Temperature extended to support upto 40000 Kelvin. Spectrometer bug when using LightSpion fixed.

Version 5.14
Date: 11-07-2017 16:55
Viso Light Inspector 5.14.msi
Added advanced export function for LDT and IES. New custom calibration.

Version 5.13
Date: 05-07-2017 14:06
Viso Light Inspector 5.13.msi
Fixed a problem with duplicate CRI graphics in PDF report. Added Batch export to PDF.

Version 5.12
Date: 04-07-2017 14:47
Viso Light Inspector 5.12.msi
Color temperature range extended from maximum 10000 Kelvin to 20000 Kelvin. Polar diagram in standard and advanced report now pointing down. Batch export of multiple IES and LDT files by selecting multiple measurement before exporting.

Version 5.11
Date: 27-06-2017 12:22
Viso Light Inspector 5.11.msi
Beam up now showed correctly in custom reports.

Version 5.10
Date: 27-06-2017 10:02
Viso Light Inspector 5.10.msi
First version with multi export of IES and LDT files. Spectra range in nm can now manually be set for agriculture and photometric measurements. Fixture dimension could not be set when using linear fixture mode has been fixed. New spectrometer calibration data structure for future calibrations.

Version 5.09
Date: 12-06-2017 16:49
Viso Light Inspector 5.09.msi
Bug fix: When using symmetry correction was the corresponding symmetry indicator not set correctly in the LDT file, has now been fixed.

Version 5.08
Date: 25-05-2017 18:34
Viso Light Inspector 5.08.msi
Bug fix: CQS curve could corrupt the PDF report, fixed.

Version 5.07
Date: 24-05-2017 11:02
Viso Light Inspector 5.07.msi
Correction made to lumen output ratio in LDT file.

Version 5.06
Date: 23-05-2017 11:46
Viso Light Inspector 5.06.msi
Key words can now be used in embedded excel charts in custom PDF rapport. BaseSensor distance can be set and distance detector can be re-calibrated.

Version 5.05
Date: 08-05-2017 16:01
Viso Light Inspector 5.05.msi
Linear LED count was not saved and reloaded in photometric setup, is now fixed.

Version 5.04
Date: 04-05-2017 13:19
Viso Light Inspector 5.04.msi
Lamp effeciency can now be set and exported with LDT file.

Version 5.03
Date: 22-04-2017 13:25
Viso Light Inspector 5.03.msi
IsoLux and IsoCandela graph added to custom report. Warmup graph is now saved with measurement and included in the custom report. Small bug fixes.

Version 5.02
Date: 23-03-2017 17:30
Viso Light Inspector 5.02.msi
Fixed bugs in Warm up stability and in Always allow detailed measurement. Fixed measurement halted error.

Version 5.01
Date: 22-03-2017 15:35
Viso Light Inspector 5.01.msi
Coefficients of Utilization, Luminaire Budgetary diagram, ISO-Candela diagram and Linear Distribution diagram, has been added for reports. Spectra for all angels now exports for all planes. Added options for warm up criteria. Added option for automatically do detailed scan, when a narrow beam is detected.

Version 5.0
Date: 10-03-2017 11:39
Viso Light Inspector 5.0.msi
First version with argiculture measurements abilities. Added the option to manually input intergration time. Bug fixes. Adjustment made to CQS calculations

Version 4.99.5
Date: 21-02-2017 16:37
Viso Light Inspector 4.99.5.msi
Distribution diagram now has 0 dgree pointing down, but can be fliped Up in photometric setup. Added fill too angular distribution. Fixed bug preventing Beam Angle from being shown after scan.

Version 4.99.4
Date: 21-02-2017 15:08
Viso Light Inspector 4.99.4.msi
Adjustment made to CQS.

Version 4.99.3
Date: 01-02-2017 16:17
Viso Light Inspector 4.99.3.msi
Bug fix: Microsoft.Office.Interop.Word.dll now included for custom PDF export.

Version 4.99.2
Date: 27-01-2017 17:47
Viso Light Inspector 4.99.2.msi
Linear lamp function is now available again under Edit->Photometric for Base and LabSpion making is possible to scale partly measured linear lamps and specify lumen per meter and per feet. Bug fix: Beam angle was not calculated when measurement finished, is now fixed.

Version 4.99
Date: 19-01-2017 13:55
Viso Light Inspector 4.99.msi
Number format added to custom PDF, for exampel by writing {PWR/0.0000} will power be shown with 4 decimals.

Version 4.98
Date: 19-01-2017 13:50
Viso Light Inspector 4.98.msi
Multiline support in desciprion field which can be used for custom fields in PDF report. Generating PDF preview could fail fixed.

Version 4.97
Date: 03-01-2017 16:31
Viso Light Inspector 4.97.msi
Support for additional external low voltage power supplies: Manson SSP-8160, KORAD KA3005P, VELLEMAN PS3005D. c-plane colors now red and blue to make c-planes more visible. Spectra drawing updated. Measurement loading speed improved

Version 4.96
Date: 13-12-2016 17:58
Viso Light Inspector 4.96.msi
3D viewer from Ilexa included. Color temperature can now be edited. SDCM mac adam steps now included.

Version 4.95
Date: 29-11-2016 10:55
Viso Light Inspector 4.95.msi
Custom PDF reporting fixes: White areas instead of graphics, key fields not filled if blank and line shift in description not shown in report has been fixed.

Version 4.94
Date: 10-11-2016 17:54
Viso Light Inspector 4.94.msi
Angular intensities in the beam details report page for linear lamps not scaled correctly has been fixed.

Version 4.93
Date: 08-11-2016 11:18
Viso Light Inspector 4.93.msi
CIE 1931 color diagram is now in vector graphics, improving report details. New Color details window under 'View->Color details'. c-plane description is removed as it was confusing.

Version 4.91
Date: 21-10-2016 12:47
Viso Light Inspector 4.91.msi
2 new PDF report pages: UGR table and TM30 details.

Version 4.90
Date: 18-10-2016 20:50
Viso Light Inspector 4.90.msi
TM30 details added to CRI window. Fixes to custom PDF reporting. Tab order fixed on main window.

Version 4.89
Date: 20-09-2016 19:41
Viso Light Inspector 4.89.msi
Added commands to the interface DLL. GetDeviceIsConnected, GetSensorIsConnected and SetYokeAutoDetect(bool Enabled).

Version 4.88
Date: 09-09-2016 17:57
Viso Light Inspector 4.88.msi
Lamp switch on/off delay implemented for EMC purpose. Firmware update: Power analyser update v1.25. Soft 'lamp off' preventing high current spikes when lamp is an inductive load and is turned off. High current spikes can result in USB disconnecting.

Version 4.86
Date: 05-09-2016 23:03
Viso Light Inspector 4.86.msi
First beta version with new custom PDF reporting, allowing custom design of PDF reports using Microsoft word editor.

Version 4.85
Date: 02-09-2016 11:28
Viso Light Inspector 4.85.msi
Peak intensities within the beam of light are now also taken into consideration for narrow beam angle detection.

Version 4.84
Date: 09-08-2016 16:38
Viso Light Inspector 4.84.msi
Supports production BaseSpion. Do not use this version with previous demo BaseSpion's

Version 4.83
Date: 08-08-2016 17:10
Viso Light Inspector 4.83.msi
Bug fix: Problem when re-measuring narrow beam angle using external power supply has been fixed.

Version 4.82
Date: 08-08-2016 13:15
Viso Light Inspector 4.82.msi
Bug fixes: Additional info and items number could disapper after photometric edit is fixed. Adding new measurement folder now works.

Version 4.81
Date: 02-08-2016 15:27
Viso Light Inspector 4.81.msi
LDT addition type indicator now set to linear luminaire for square light output. Item number is now included in the LDT Lamp number field. Voltage, Current and measurement disctance now included in csv export

Version 4.80
Date: 26-07-2016 17:07
Viso Light Inspector 4.80.msi
LightSpion excessive speed at high intensities has been fixed using spectrometer averaging.